Powertrain Control Module (PCM) - 2.0L GTDI: Installation

1.

Install the PCM to the bracket and install the 4 bolts.
- Tighten to 8 Nm (71 lb-in).

GFD38121

Courtesy of FORD MOTOR COMPANY

2.

Install the PCM and bracket assembly and the 2 nuts.
- Tighten to 8 Nm (71 lb-in).

GFD38120

Courtesy of FORD MOTOR COMPANY

3.

Connect the 2 PCM electrical connectors.
- Attach the wiring harness retainer from the cowl.

GFD38119

Courtesy of FORD MOTOR COMPANY

4.

Install the cowl panel. REFER to Front End Body Panels .

5.

Restore the module configuration. Carry out the module configuration restore steps of the PMI procedure. REFER to Module Configuration .

6.

Reprogram the PATS. Carry out the Parameter Reset procedure. Vehicles without Intelligent Access (IA), REFER to Passive Anti-Theft System (PATS), Without Intelligent Access (IA) . Vehicles With Intelligent Access, REFER to Passive Anti-Theft System (PATS), With Intelligent Access (IA) .

7.

After completing the repairs, use the scan tool to perform the Misfire Monitor Neutral Profile Correction procedure, following the on-screen instructions.