Throttle Position (TP) Sensor - 3.5L GTDI: Installation

NOTE: When installing the new TP sensor, make sure that the radial locator tab on the TP sensor is aligned with the radial locator hole on the ETB.

NOTE: Do not use power tools.

• 1.
  
  Install a new TP sensor and using hand tools 2 new bolts.
  • Tighten to 3 Nm (27 lb-in).

Courtesy of FORD MOTOR COMPANY

• 2.
  
  

Courtesy of FORD MOTOR COMPANY

• 3.
  
  Install the CAC outlet pipe. REFER to Intake Air Distribution and Filtering .