Pinpoint Test P : U3003:17: Notes
Diagnostic Overview
U3003:17
Normal Operation and Fault Conditions
The ABS module, hydraulic pump and solenoid valves require an operating voltage that is between 10 and 17 volts. The ABS module receives this voltage from the BJB. The ABS module has a single ground circuit located in the engine compartment wiring harness. An overcharging condition in the charging system will result in the ABS module setting a DTC. This DTC may also set in the ABS module due to battery charging or vehicle jump starting events.
DTC Fault Trigger Conditions
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| U3003:17 | Battery Voltage: Circuit Voltage Above Threshold | This DTC sets in continuous memory and on-demand if the voltage supplied to the ABS module is above 17 volts with vehicle speed greater than 10 km/h (6.2 mph). This DTC may also set in the ABS module due to battery charging or vehicle jump starting events. |