Removal And Installation: Seat: Installation

1.

For the RH 40 percent seat, position the seat in the vehicle and install the retainers.
1. 1.
  
  Install the seat-to-floor rear inboard nut.
  - Tighten to 48 Nm (35 lb-ft).
1. 2.
  
  Install the seat-to-floor rear outboard nut.
  - Tighten to 48 Nm (35 lb-ft).
1. 3.
  
  Install the seat-to-floor front outboard bolt.
  - Tighten to 48 Nm (35 lb-ft).
1. 4.
  
  Install the seat-to-floor front inboard bolt.
  - Tighten to 48 Nm (35 lb-ft).

GFD37513

Courtesy of FORD MOTOR COMPANY

2.

For the 60 percent seat or LH 40 percent seat, position the seat in the vehicle and install the retainers.
1. 1.
  
  Install the seat-to-floor rear inboard nut.
  - Tighten to 48 Nm (35 lb-ft).
1. 2.
  
  Install the seat-to-floor rear outboard nut.
  - Tighten to 48 Nm (35 lb-ft).
1. 3.
  
  Install the seat-to-floor front outboard bolt.
  - Tighten to 48 Nm (35 lb-ft).
1. 4.
  
  Install the seat-to-floor front inboard bolt.
  - Tighten to 48 Nm (35 lb-ft).

GFD37514

Courtesy of FORD MOTOR COMPANY

3.

Connect the electrical connector(s).

4.

If the SRS was depowered, repower the SRS. REFER to Supplemental Restraint System - With Intelligent Access or REFER to Supplemental Restraint System - Without Intelligent Access. .