Seat Backrest Cover - 60 Percent: Removal

All seats 

1. 1.
   
   Remove the 60 percent seat. Refer to Seat .

1. 2.
   
   

Courtesy of FORD MOTOR COMPANY

1. 3.
   
   

Courtesy of FORD MOTOR COMPANY

1. 4.
   
   

Courtesy of FORD MOTOR COMPANY

1. 5.
   
   

Courtesy of FORD MOTOR COMPANY

1. 6.
   
   

Courtesy of FORD MOTOR COMPANY

Heated seats 

1. 7.
   
   

Courtesy of FORD MOTOR COMPANY

All seats 

1. 8.
   
   

Courtesy of FORD MOTOR COMPANY

Seats with inflatable belts 

1. 9.
   
   Remove the safety belt buckle and inflator. REFER to Safety Belt System .

All seats 

1. 10.
   
   
   • Tighten to 3.5 Nm (31 lb-in).

Courtesy of FORD MOTOR COMPANY

1. 11.
   
   Remove the head restraint guide sleeves. REFER to Seating 1st Row .

NOTE: During installation, make sure the safety belt is not twisted.
NOTE: Without inflatable safety belts shown, with inflatable safety belts similar.
NOTE: To pivot the backrest, the inboard latch foot must be in the latched position.
1. 12.
   
   • Tighten to 40 Nm (30 lb-ft).

Courtesy of FORD MOTOR COMPANY

1. 13.
   
   

Courtesy of FORD MOTOR COMPANY

Seats with armrest 

1. 14.
   
   Remove the armrest. Refer to Armrest .

1. 15.
   
   

Courtesy of FORD MOTOR COMPANY

Heated seat 

1. 16.
   
   

Courtesy of FORD MOTOR COMPANY

All seats 

NOTE: Use care when separating the backrest cover from the hook-and-loop strip or the hook-and-loop strip may be torn from the backrest foam pad.
1. 17.
   

Courtesy of FORD MOTOR COMPANY

1. 18.
   
   

Courtesy of FORD MOTOR COMPANY