Antenna Cable - Front: Removal

WARNING: Before beginning any service procedure in this article, refer to SERVICE INFORMATION .

1.

Remove the ACM. Refer to Audio Control Module (ACM)

2.

Remove the RH front door scuff plate trim panel. REFER to Interior Trim and Ornamentation

3.

Remove the pin-type retainer and position aside the carpet.

GFD37063

Courtesy of FORD MOTOR COMPANY

4.

Disconnect the front antenna cable from the rear antenna cable.

GFD37064

Courtesy of FORD MOTOR COMPANY

5.

Lower the glove compartment completely.

6.

Release the pin-type retainers and remove the front antenna cable.

GFD37065

Courtesy of FORD MOTOR COMPANY