Pinpoint Test Ad : B272A: Notes
Refer to Climate Controlled Seats for schematic and connector information.
Normal Operation and Fault Conditions
The DCSM monitors seat cushion temperature while it supplies voltage and ground to both blower motors. The DCSM also supplies a variable voltage signal to control the blower speed. Cabin air enters the blower through a filter attached to the blower motor housing. Heated or cooled air exits the blower motor and flows through a duct to the foam pad.
DTC Fault Trigger Conditions
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| B272A | Passenger Cushion Over-Temp Detected | If the passenger seat cushion TED temperature exceeds 85 °C (185 °F) in heat mode or 70 °C (158 °F) in cool mode for more than 34 seconds the DCSM shuts down the passenger seat system and sets this DTC. |