Pinpoint Test H : B106E, B106F
- H1 REVIEW THE DTCs
- Review the DTCs from the DSM self-test.
Are DTCs B106F and B1342 present?
Yes CORRECT the cause of any other DTCs present first. When other DTCs are corrected, INSTALL a new DSM. REFER to Seating 1st Row . No GO to H2. - H2 REPAIR OTHER DTCs
- Repair the cause of any DTCs present, other than DTC B106E. REFER to Seating 1st Row .
- Clear the DTCs.
- Using a scan tool, perform the DSM self-test.
Is DTC B106E still present?
Yes The fault causing the output state to be disabled is still present. REPAIR the cause of the concern. No The system is operating correctly at this time. The concern was caused by a fault in one of the output circuits.