Pinpoint Test K : The RF Tweeter Speaker Is Inoperative Or Has Poor Sound Quality
- K1 CHECK THE RF DOOR SPEAKER
- Ignition ON.
- Operate the audio system in radio tuner AM/FM mode.
Does the RF door speaker operate correctly?
Yes GO to K2. No GO to Pinpoint Test J . - K2 CHECK THE AUDIO SIGNAL TO THE RF TWEETER SPEAKER
- Ignition OFF.
- Disconnect: RF Tweeter Speaker C613B .
- Operate the audio system in radio tuner AM/FM mode.
Is a fluctuating AC voltage present?
Yes INSTALL a new RF tweeter speaker. Refer to Speaker - Tweeter . No GO to K3. - K3 CHECK THE AUDIO CIRCUITS TO THE RF TWEETER SPEAKER FOR A SHORT TO VOLTAGE
- Ignition OFF.
- Disconnect: ACM C240A .
- Ignition ON.
Is any voltage present?
Yes REPAIR the circuit in question. No GO to K4. - K4 CHECK THE AUDIO CIRCUITS TO THE RF TWEETER SPEAKER FOR A SHORT TO GROUND
- Ignition OFF.
Are the resistances greater than 10, 000 ohms?
Yes GO to K5. No REPAIR the circuit in question. - K5 CHECK THE AUDIO CIRCUITS FOR A SHORT TOGETHER
Is the resistance greater than 10, 000 ohms?
Yes GO to K6. No REPAIR the circuits. - K6 CHECK THE AUDIO CIRCUITS TO THE RF TWEETER SPEAKER FOR AN OPEN
Are the resistances less than 3 ohms?
Yes INSTALL a new RF door speaker. REFER to Speaker - Door . No REPAIR the circuit in question.


