Pinpoint Test G : The LF Tweeter Speaker Is Inoperative Or Has Poor Sound Quality
- G1 CHECK THE LF DOOR SPEAKER
- Ignition ON.
- Operate the audio system in radio tuner AM/FM mode.
Does the LF door speaker operate correctly?
Yes GO to G2. No GO to Pinpoint Test F . - G2 CHECK THE AUDIO SIGNAL TO THE LF TWEETER SPEAKER
- Ignition OFF.
- Disconnect: LF Tweeter Speaker C513 .
- Operate the audio system in radio tuner AM/FM mode.
Is a fluctuating AC voltage present?
Yes INSTALL a new LF tweeter speaker. Refer to Speaker - Tweeter . No GO to G3. - G3 CHECK THE AUDIO CIRCUITS TO THE LF TWEETER SPEAKER FOR A SHORT TO VOLTAGE
- Ignition OFF.
- Disconnect: LF Door Speaker C523 .
- Ignition ON.
Is any voltage present?
Yes REPAIR the circuit in question. No GO to G4. - G4 CHECK THE AUDIO CIRCUITS TO THE LF TWEETER SPEAKER FOR A SHORT TO GROUND
- Ignition OFF.
Are the resistances greater than 10, 000 ohms?
Yes GO to G5. No REPAIR the circuit in question. - G5 CHECK THE AUDIO CIRCUITS FOR A SHORT TOGETHER
Is the resistance greater than 10, 000 ohms?
Yes GO to G6. No REPAIR the circuits. - G6 CHECK THE AUDIO CIRCUITS TO THE LF TWEETER SPEAKER FOR AN OPEN
Are the resistances less than 3 ohms?
Yes INSTALL a new LF door speaker. Refer to Speaker - Door . No REPAIR the circuit in question.


