Removal And Installation: Antenna: Removal

1.

Remove the LH and RH D-pillar trim panel. REFER to Interior Trim and Ornamentation

2.

Remove the LH and RH C-pillar trim panel. REFER to Interior Trim and Ornamentation - With Inflatable Safety Belts or REFER to Interior Trim and Ornamentation - Without Inflatable Safety Belts. .

3.

Carefully lower the rear of the headliner.

4.

Remove the AM/FM antenna with SDARS mounting bolt and disconnect the rear antenna cable connectors.
1. 1.
  
  To install, tighten to 10 Nm (89 lb-in).

GFD37061

Courtesy of FORD MOTOR COMPANY

5.

Remove the AM/FM antenna with SDARS.