- 1.
Remove the LH front door trim panel. REFER to Interior Trim and Ornamentation
.
- 2.
Position the weather shield aside.
- 3.
Disconnect the keyless entry keypad electrical connector and unclip the connector from the door.
- 4.
Unclip the keyless entry keypad wiring harness from the door.
- 5.
Remove the exterior door window glass belt moulding screw and moulding.
- To install tighten to 0.9 Nm (8 lb-in).
 Courtesy of FORD MOTOR COMPANY
|
NOTE:
The keyless entry keypad is attached to the door with double-sided tape. Before installing the new keypad, clean the window applique mounting area with an appropriate alcohol-based cleaner and install new double-sided tape to the keypad.
- 6.
Remove the keyless entry keypad.