LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2015 >> Explorer Limited, 3.5L Eng VIN 8, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Anti-Theft Systems >> Door Handles, Door Locks, Door Latches And Entry Systems - With Intelligent Access (IA) >> Removal And Installation >> Ignition Lock Cylinder Housing >> Removal

Ignition Lock Cylinder Housing: Removal

  1. 1.

    If equipped with Premium Audio, remove the FCDIM. REFER to Information and Entertainment Systems - Premium .

  1. 2.

    If equipped with Premium Plus Audio or SonySound, remove theFront Display Interface Module (FDIM).

    Premium Plus: 

    REFER to Information and Entertainment Systems - Premium Plus or

    SonySound: 

    REFER to Information and Entertainment Systems - Sony Sound .

  1. 3.

    Insert a non-marring tool between the ignition lock cylinder bezel and the instrument panel and pry outward.
GFD37692Courtesy of FORD MOTOR COMPANY

  1. 4.

    NOTE: Ignition lock cylinder housing shown in illustration from behind to show location of tab.

    Remove the ignition lock cylinder housing.

    • Push the tab to release the ignition lock cylinder housing.
    • Disconnect the 2 electrical connectors.
GFD37695Courtesy of FORD MOTOR COMPANY
scientia non olet · About LEMON Manuals