Keyless Entry Keypad: Removal

1.

Remove the LH front door trim panel. REFER to Interior Trim and Ornamentation .

2.

Position the weather shield aside.

3.

Disconnect the keyless entry keypad electrical connector and unclip the connector from the door.

4.

Unclip the keyless entry keypad wiring harness from the door.

5.

Remove the exterior door window glass belt moulding screw and moulding.
- To install tighten to 0.9 Nm (8 lb-in).

GFD37701

Courtesy of FORD MOTOR COMPANY

6.

NOTE: The keyless entry keypad is attached to the door with double-sided tape. Before installing the new keypad, clean the window applique mounting area with an appropriate alcohol-based cleaner and install new double-sided tape to the keypad.

Remove the keyless entry keypad.