PINPOINT TEST F : The Flash-To-Pass Function Is Inoperative
- F1 VERIFY THE HIGH BEAM HEADLAMP OPERATION
- Ignition ON.
- Place the headlamp switch in the headlamps on position.
- Place the multifunction switch in the high beam position while observing the headlamps.
Do the high beam headlamps illuminate?
Yes INSTALL a new multifunction switch. REFER to Steering Column Multifunction Switch . TEST the system for normal operation. If the concern still exists, INSTALL a new SCCM. REFER to Steering Column Control Module (SCCM) . No GO to Pinpoint Test C .