Stoplamp Switch: Removal
WARNING:
Before beginning any service procedure in this article, refer to Safety Warnings in SERVICE INFORMATION
- 1.
Remove the steering column cover trim panel and the steering column cover. REFER to Instrument Panel and Console .
- 2.
Disconnect the stoplamp switch electrical connector and rotate the stoplamp switch clockwise approximately one-eighth turn to remove the stoplamp switch.
NOTE:
Do not press, pull or otherwise move the brake pedal while installing the stoplamp switch and cruise control deactivation switch. Install these switches with the booster push rod attached to the brake pedal and with the brake pedal in the at-rest position. Installing these switches with the brake pedal in any other position results in incorrect adjustment and damages the switches.