PINPOINT TEST AO : The Turn Signal On Warning Chime Is Inoperative
- AO1 CHECK THE SAFETY BELT WARNING CHIME OPERATION
- Ignition OFF.
- Ignition ON.
- Monitor the safety belt warning chime when the ignition switch is transitioned from OFF to RUN.
Does the safety belt warning chime operate for approximately 6 seconds?
Yes GO to AO2. No Refer to IPC Hardware Testing . - AO2 CHECK THE TURN SIGNAL INDICATOR OPERATION
- Operate the turn signals.
Do the turn signal indicators operate correctly?
Yes Refer to IPC Hardware Testing . No GO to Pinpoint Test P .