Universal Serial Bus (USB) Cable - Upper: Removal

WARNING: Before beginning any service procedure in this article, refer to Safety Warnings in SERVICE INFORMATION .

1. 1.
   
   Remove the FDIM. Refer to Front Display Interface Module (FDIM) 

1. 2.
   
   Position the RF seat fully rearward and fully reclined.

1. 3.
   
   Remove the RH floor console side trim panel.
   • Pull outward to release the 12 clips.

Courtesy of FORD MOTOR COMPANY

1. 4.
   
   Disconnect the upper USB cable from the lower USB cable.

Courtesy of FORD MOTOR COMPANY

1. 5.
   
   Remove the upper USB cable.
   • Disconnect the 3 pin-type retainers.

Courtesy of FORD MOTOR COMPANY