LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2015 >> Explorer Limited, 3.5L Eng VIN 8, AWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Seats >> Seating System - 1ST Row >> Removal And Installation >> Dual Climate Controlled Seat Module (DCSM) >> Installation

Dual Climate Controlled Seat Module (DCSM): Installation

  1. 1.

    Install the DCSM in the following sequence.
    • Connect the electrical connectors.
    • Secure the locking wedges on the 2 DCSM electrical connectors.
    • Position the DCSM and install the screws.
    NOTE: This step is necessary only if the DCSM is being replaced.

  1. 2.
    PMI is required when installing a new DCSM. Refer to the scan tool instructions to carry out PMI.
scientia non olet · About LEMON Manuals