Seat Backrest Thermo-Electric Device (TED): Installation

1.

Install the backrest TED.
- Position the TED through the power lumbar cable.
- Attach the TED to the backrest foam pad wire.
- Engage the TED upper retainers to the backrest frame wire.
- Connect the electrical connector and attach the pin-type retainer.

2.

Position the backrest cover downward, attach the hook-and-loop strips and engage the J-clip at the rear to the backrest frame wire.

3.

Position the backrest cover downward, attach the hook-and-loop strips and install the 3 second row hog rings.

4.

Position the backrest cover downward, attach the hook-and-loop strips and install the 3 first row hog rings.

5.

Position the backrest cover downward and attach the hook-and-loop strips.

6.

Route the wire harnesses through the backrest cover holes and engage the lower J-clips.

7.

On each side of the seat backrest, attach the hook-and-loop strips.

8.

Install the seat backrest. Refer to Seat - Exploded View, Front .