PINPOINT TEST H : U3000:44, 45, 46, 48, 49 Or 4A
- H1 CHECK THE SOD-R and SOD-L FOR DTCs
- Ignition ON.
- Using a scan tool, perform the SOD-R and SOD-L module self-tests.
- Clear the DTCs.
- Ignition OFF.
- Wait 5 seconds.
- Ignition ON.
- Repeat the SOD-R and SOD-L module self-tests.
Are any U3000 DTCs present?
Yes INSTALL a new SOD-R or SOD-L. Refer to Side Obstacle Detection (SOD) Module . No The system is operating correctly at this time. The concern may have been caused by an intermittent problem.