LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2015 >> Explorer Limited, 3.5L Eng VIN 8, AWD >> Repair and Diagnosis (Single Page) >> Body & Frame >> Door Locks >> Passive Anti-Theft System (Pats) - With Intelligent Access (IA) >> General Procedures >> Erase All Keys and Program Two Keys

Erase All Keys and Program Two Keys

NOTE: This procedure erases all programmed ignition keys from the vehicle memory. The vehicle cannot start until a minimum of 2 keys are programmed into the BCM.
NOTE: This procedure erases all MyKey ® features on all of the keys that are programmed to the vehicle. All of the keys then operate as normal (admin) keys with no restrictions.
NOTE: To enter PATS security access if no programmed IA keys are available, start a vehicle session using a tear tag or PCM part number. PATS security access can still be granted even with the ignition off.

  1. 1.

    From the scan tool, enter TOOLBOX. Select BODY>SECURITY>PATS Functions and follow the IDS on-screen instructions to PATS security access.

  1. 2.

    From the scan tool menu, select "Ignition Key Code Erase" and follow the IDS on-screen instructions until the key erase procedure completes.

  1. 3.

    All keys are now erased. Leave the scan tool connected and program 2 keys. REFER to Key Programming Using Diagnostic Equipment .
scientia non olet · About LEMON Manuals