Pinpoint Test A : B10D7:05

A1 CHECK THE BCM DTCs FROM THE SELF-TEST

Using a scan tool, perform the BCM self-test.

Is DTC B10D5:13, B10D7:87, B10D7:8F, or B10D9:87 retrieved?

Yes	REFER to Multifunction Electronic Modules . RESOLVE these DTCs first.
No	GO to A2.

A2 CHECK THE PATS KEY

Check that the correct PATS keys are used with the vehicle. Refer to Passive Anti-Theft System (PATS) - Without Intelligent Access (IA) , IKT.

Are the correct keys being used?

Yes	ATTEMPT to program the key again. If key programming fails, DISCARD the damaged key and PROGRAM a new key. Refer to Key Programming Using Diagnostic Equipment or Refer to Key Programming Using Two Programmed Keys .
No	OBTAIN the correct key(s) for the vehicle. PROGRAM the new key(s). Refer to Key Programming Using Diagnostic Equipment or Refer to Key Programming Using Two Programmed Keys .