PINPOINT TEST E : The Engine Does Not Start
- E1 CHECK FOR COMMUNICATION WITH THE PCM AND THE BCM
- Using a scan tool, perform the network test.
Does the scan tool establish communication with the PCM and the BCM ?
Yes GO to E2. No Go to Pinpoint Test A or Go to Pinpoint Test I . - E2 CHECK FOR BCM DTCs
- Using a scan tool, perform the BCM self-test.
Are any BCM DTCs present?
Yes REFER to Multifunction Electronic Modules . No The no-start condition is not caused by the PATS. REFER to the ENGINE CONTROLS - POWERTRAIN DTC CHARTS & DESCRIPTIONS (EXCEPT DIESEL & HYBRID) to diagnose the cause of the no-start condition.