LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2015 >> Explorer Limited, 3.5L Eng VIN 8, AWD >> Repair and Diagnosis (Single Page) >> Body & Frame >> Exterior Body Panels >> Body Closures >> Removal And Installation >> Pinch Strip Switch >> Removal

Pinch Strip Switch: Removal

NOTE: LH side shown, RH side similar.

  1. 1.

    Remove the liftgate trim panel. REFER to Interior Trim and Ornamentation .

  1. 2.

    Disconnect the pinch strip switch electrical connector.
GFD37271Courtesy of FORD MOTOR COMPANY

  1. 3.

    Remove the 3 pin-type retainers and the push pin.
GFD37272Courtesy of FORD MOTOR COMPANY

  1. 4.

    Remove the pinch strip switch.
    • Remove the rubber grommet and route the electrical connector out of the liftgate.
GFD37273Courtesy of FORD MOTOR COMPANY