Bumper Cover - Front: Removal

1.

Remove the front fender mouldings. REFER to Exterior Trim and Ornamentation .

2.

NOTE: LH side shown in illustration, RH side similar.

Remove the fender-to-bumper cover screws.

GFD37774

Courtesy of FORD MOTOR COMPANY

3.

NOTE: LH side shown in illustration, RH side similar.

Disconnect the fog lamp electrical connectors.

GFD37775

Courtesy of FORD MOTOR COMPANY

4.

If equipped, disconnect the 2 active park assist electrical connectors.

5.

If equipped, disconnect the grille flashing LED electrical connector.

6.

Remove the 3 lower bumper cover-to-radiator splash shield bolts.

GFD37776

Courtesy of FORD MOTOR COMPANY

7.

Remove the 7 bolts and 2 pin-type retainers from the upper radiator sight shield.

GFD37777

Courtesy of FORD MOTOR COMPANY

8.

NOTE: LH side shown in illustration, RH side similar.

Release the 4 locking tabs on each side of the bumper cover and remove the bumper cover and grille assembly.

GFD37778

Courtesy of FORD MOTOR COMPANY