C-Pillar Trim Panel - Without Inflatable Safety Belts: Installation

1.

Feed the second row outboard safety belt through the C-pillar trim panel and install the trim panel on the body.

2.

Install the C-pillar trim bolt.
- 1.
  
  Tighten to 9 Nm (80 lb-in).

3.

Install the second row outboard safety belt anchor bolt.
- 1.
  
  Tighten to 40 Nm (30 lb-ft).

4.

Position back the rear door weatherstrip.

5.

Install the quarter trim panel. Refer to Quarter Trim Panel - Without Inflatable Safety Belts .