Dual Climate Controlled Seat Module (DCSM): Removal

NOTE: For component identification and locations, refer to Seat - Exploded View, Front .

NOTE: This step is necessary only if the DCSM is being replaced.
1. 1.
   PMI is required when installing a new DCSM. Refer to the scan tool instructions to carry out PMI.

1. 2.
   
   Position the front passenger seat all the way back and up to access the DCSM.

1. 3.
   
   Remove the DCSM in the following sequence.
   • Remove the screws.
   • Release the locking wedges on the 2 DCSM electrical connectors.
   • Disconnect the electrical connectors.
   • Remove the DCSM.

Courtesy of FORD MOTOR COMPANY