Lumbar Assembly - Power: Removal
NOTE:
For parts identification and location, refer to Seat - Exploded View, Front .
- 1.
Remove the seat backrest. Refer to Seat Backrest .
- 2.
Disengage the backrest cover lower J-clips and route the wire harnesses out of the holes in the backrest cover.
NOTE:
Note wire harness routing for installation.
- 4.
Separate the backrest cover hook-and-loop strips from the backrest foam pad and position the backrest cover up to the first row of hog rings.
NOTE:
Use care when separating the backrest cover from the hook-and-loop strip, or the hook-and-loop strip can be torn from the backrest foam pad.
- 7.
If equipped, disconnect the backrest TED electrical connector and disengage the pin-type retainer.
