LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2015 >> Explorer Limited, 3.5L Eng VIN 8, AWD >> Repair and Diagnosis (Single Page) >> Body & Frame >> Seats >> Seating System - 2ND Row >> Removal And Installation >> Power Release Seat Motor >> Removal

Power Release Seat Motor: Removal

NOTE: For parts identification and location, Refer to Seat - Exploded View .

  1. 1.

    Remove the manual recline handle.

    1. 1.

      Locate the spring clip between the recline cover and handle.

    1. 2.

      Remove the clip and slide the manual recline handle off the shaft.
GFD37506Courtesy of FORD MOTOR COMPANY

  1. 2.

    Pull to release the retainers and remove the outboard recliner outer cover.

    1. 1.

      Pull the strap through the outboard cover.

  1. 3.

    Separate the cable retainer and cable end from the outboard recliner.
GFD37507Courtesy of FORD MOTOR COMPANY

  1. 4.

    Separate the J-clips and open the cushion cover.
GFD37508Courtesy of FORD MOTOR COMPANY
    NOTE: Typical seat shown, others similar.

  1. 5.
    From under the seat, pull the cushion cover retainers out from between the cushion frame and seat track on the outboard side.
GFD37509Courtesy of FORD MOTOR COMPANY

  1. 6.

    Remove the 2 screws, disconnect the electrical connector, route the cable out and remove the power fold seat motor.
GFD37510Courtesy of FORD MOTOR COMPANY
scientia non olet · About LEMON Manuals