Diagnostic Test

1. Turn the ignition on.
2. With the scan tool, create a Vehicle Scan Report and attach it to the repair order.
3. With the scan tool, record any Power Sliding Door Inhibitors.
4. Erase the DTCs.
5. Attempt to operate the Right Power Sliding Door.
6. With the scan tool, read the DMRR DTCs.

   Is DTC B2500-01 POWER SLIDING DOOR LATCH-GENERAL ELECTRICAL FAILURE set?

   Yes - the DTC is Active 

   • Perform the diagnostic test for DTC B2500-01 POWER SLIDING DOOR LATCH-GENERAL ELECTRICAL FAILURE.

   No - the DTC is set but not Active 

   • Perform the TESTING FOR AN INTERMITTENT CONDITION procedure. Refer to TESTING FOR AN INTERMITTENT CONDITION .

   No - the DTC is not set 

   • Go To  2

Is the DTC active?

Yes 

• Go To  3

No 

• Perform the TESTING FOR AN INTERMITTENT CONDITION procedure. Refer to TESTING FOR AN INTERMITTENT CONDITION .

1. Thoroughly inspect both the front and rear Right Power Sliding Door Latches for any causes or signs of mechanical failure/damage.

   Does either Power Sliding Door Latch have any mechanical failure/damage?

   Yes 

   • Replace the Right Power Sliding Door Latch or Latches in accordance with Service Information. Refer to LATCH, FRONT, REMOVAL AND INSTALLATION or LATCH, REAR, REMOVAL AND INSTALLATION .

   No 

   • Replace the Right Rear Door Module in accordance with Service Information. Refer to REAR .
   • Perform the BODY VERIFICATION TEST. Refer to BODY VERIFICATION TEST .
   • Test complete.