LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2021 >> Voyager LX, Gas >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Collision/Avoidance >> Audio/Video/Entertainment/Connectivity (Service Information) >> Amplifier >> Removal And Installation >> Installation

Removal And Installation: Installation

GC0177988Courtesy of CHRYSLER GROUP, LLC
  1. Position the amplifier (1) to the instrument panel carrier frame. If amplifier and bracket were separated install the four fasteners to retain the amplifier to the bracket.
  2. Install and securely tighten the amplifier bracket to instrument panel carrier frame bolts (2).
  3. Connect the wire harness connectors to the amplifier.
  4. Install the glove box. Refer to GLOVE BOX, INSTRUMENT PANEL, REMOVAL AND INSTALLATION .
  5. Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector to the negative battery cable.
scientia non olet · About LEMON Manuals