Diagnostic Test

CHECK FOR AN ACTIVE DTC
1. With the scan tool, create a Vehicle Scan Report and attach it to the repair order.
2. With the scan tool, read PCM DTCs.
  Are there any Charging or Battery DTCs present?
  
  Yes
  - Repair the PCM DTC(s). Refer to DIAGNOSTIC CODE INDEX .
  No
  - Go To 2
CHECK THE DRIVER DOOR MODULE
1. With the scan tool, create a Vehicle Scan Report and attach it to the repair order.
2. Start the engine and run for two minutes.
3. With the scan tool, read DDM DTCs.
  Is the DTC active?
  
  Yes
  - Replace the Driver Door Module in accordance with the Service Information. Refer to MODULE, DOOR (DDM/PDM), REMOVAL AND INSTALLATION .
  - Perform the BODY VERIFICATION TEST. Refer to BODY VERIFICATION TEST .
  No
  - Perform the TESTING FOR AN INTERMITTENT CONDITION procedure. Refer to TESTING FOR AN INTERMITTENT CONDITION .
  - Test complete.