Removal And Installation: Removal

Courtesy of CHRYSLER GROUP, LLC

NOTE:

The tire pressure sensor (3), the valve stem (2), and all valve stem components including the cap (1) and the valve core can be serviced and replaced individually.

Raise and support the vehicle. Refer to HOISTING, STANDARD PROCEDURE .
NOTE:
When dismounting or mounting the tire on the wheel, follow the tire changer manufacturers instructions while paying special attention to avoid damaging the pressure sensor.
Remove tire and wheel assembly and dismount the tire from the wheel. Refer to REMOVAL AND INSTALLATION .

Courtesy of CHRYSLER GROUP, LLC
To remove the sensor (1) from the valve stem (3), remove the valve stem mounting fastener (2).
NOTE:
Replace the valve stem (3) assembly with each tire change or when the tire is removed from the wheel.

NOTE:
Install a NEW valve stem (3) and valve stem core if they are removed from the wheel or valve stem.
Remove the valve stem (3) from the wheel.