LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2021 >> Voyager LX, Gas >> Repair and Diagnosis >> Electrical >> Gauges >> Body - Interior & Exterior >> Doors - Front >> Cylinder, Door Lock >> Removal And Installation >> Installation

Removal And Installation: Installation

GC0170866Courtesy of CHRYSLER GROUP, LLC
NOTE:

Lock cylinder is only present on the front driver door. The remaining doors are equipped with a delete cap. The delete caps are removed/installed similar to the lock cylinder.

  1. Position the lock cylinder (1) into the trim cap (2).
    GC0170912Courtesy of CHRYSLER GROUP, LLC
  2. Position the door lock cylinder/trim cap (1) onto the front door.
  3. Tighten the slide plate screw (2) securely and install the protective plug over the fastener opening (2).
  4. Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector to the negative battery cable.
scientia non olet · About LEMON Manuals