Removal And Installation: Installation
- If the applique is to be reused:
- Remove two sided tape residue from the applique.
- Clean back of the applique with Mopar® Super Kleen solvent, or equivalent.
- Wipe dry with lint free cloth.
- Apply new two sided adhesive tape (1) to back of applique.
- Clean the painted surface (3) with Mopar® Super Kleen solvent, or equivalent. Wipe surface dry with lint free cloth.
- Remove the protective cover from the tape (1) on back of the applique (2).
- Align the spring retainers on the applique (2) to the appropriate slots on the door frame (3) and with the use of hand pressure seat the clips fully.
- Using a roller tool or equivalent, roll along the applique where the two sided tape is applied with enough force to guarantee adhesion.