Removal And Installation: Installation
- Position the seatback frame assembly (2) and install the seatback recliner bolts (3). Tighten the third row seatback recliner bolts to the proper specification. Refer to TECHNICAL SPECIFICATIONS .
- Install the third row seat belt buckle (1). Refer to BUCKLE, SEAT BELT, REMOVAL AND INSTALLATION
.
- Install the headrest mechanism (1). Install the two headrest nuts (4) and tighten to the proper torque specifications. Refer to TECHNICAL SPECIFICATIONS .
- Install the four headrest bolts (2) and tighten securely.
- Install the headrest cable (2), connect the cable end (1) and close the cover (3).
- Install the seatback board (1).
- Install the third row Stow-N-Go seat back cover. Refer to COVER, SEAT BACK, STOW-N-GO, REMOVAL AND INSTALLATION .
- Install the cover (3) the two screws (1).
- Install the side cover (3) and the screw (1) on both sides of the seat.
- Clip the soft cover (2) into place.
- Install the third row Stow-N-Go seat. Refer to SEAT, STOW-N-GO, REMOVAL AND INSTALLATION .
