Filler Neck: Installation
- Be certain that the grommet (4) on the top of the reservoir (5) is properly positioned and in good condition.
- Position the filler neck (3) and filler cap into the right front corner of the engine compartment as a unit.
- Lubricate and align the base of the filler neck with the filler neck grommet on the top of the reservoir (5).
- Use a back and forth twisting action to engage the base of the filler neck into the filler neck grommet (4) on the top of the reservoir (5).
- Align and install the screw (2) to the front fascia support bracket (1). Tighten the screw securely.
- Fill the washer reservoir with any washer fluid drained from the filler neck during the removal procedure.