Removal And Installation: Installation
- Lubricate the rubber mount sockets with Mopar® Rubber Bushing Installation Lube.
- Install the air cleaner body straight down on the locating pins until the rubber mount sockets are fully seated.
- Install the bolt (1) and tighten to the proper torque specification. Refer to TECHNICAL SPECIFICATIONS .
- Install the air inlet duct and engage the retainers.
- Install the air cleaner element into the air cleaner housing.
- Install the hose to the resonator and seat the cover onto the housing. Tighten the housing cover retaining screws (2).
- Tighten the clamp (1) to the proper torque specification. Refer to TECHNICAL SPECIFICATIONS .
- Connect the fresh air makeup hose (1) to the air cleaner body.
