LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2021 >> Voyager LX, Gas >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 3.6L Engine (Service Information) >> Engine Mounting >> Insulator, Engine Mount, Right >> Removal And Installation >> Removal

Removal And Installation: Removal

  1. Remove the engine cover. Refer to COVER, ENGINE, REMOVAL AND INSTALLATION .
    GC0177791Courtesy of CHRYSLER GROUP, LLC
    NOTE:

    It is not necessary to drain the cooling system or remove the coolant hoses.

  2. Remove the bolts (1) and position aside the pressurized coolant bottle.
  3. Raise and support the vehicle. Refer to HOISTING, STANDARD PROCEDURE .
  4. Remove the belly pan. Refer to BELLY PAN, ENGINE, REMOVAL AND INSTALLATION or BELLY PAN, FRONT, REMOVAL AND INSTALLATION .
  5. Remove support and lower the vehicle.
  6. Carefully position a floor jack under the engine to support.
    GC0178369Courtesy of CHRYSLER GROUP, LLC
  7. Remove the ground strap (1) from the engine mount.
    GC0178126Courtesy of CHRYSLER GROUP, LLC
  8. Remove the mount brace to body bolt (1)
  9. Remove the mount brace to engine mount bolts (2) and the engine mount brace.
    GC0177993Courtesy of CHRYSLER GROUP, LLC
  10. Remove the engine mount to frame bolts (1).
  11. Remove the four engine mount to engine bolts (2) and then the right engine mount.
    GC0178116Courtesy of CHRYSLER GROUP, LLC
  12. If necessary, remove the bolts (1) and the right engine mount bracket.
scientia non olet · About LEMON Manuals