Latch Clip Type 1 Fitting

Courtesy of CHRYSLER GROUP, LLC

Depending on vehicle model and engine, 2 different types of safety latch clips are used. One is tethered (1) to fuel line and the other is not. A special tool will be necessary to disconnect the fuel line after latch clip is removed. The latch clip may be used on certain fuel line and fuel rail connections or to join fuel lines together.

1. Pry up on the latch clip (4) with a screwdriver (3).
2. Slide the latch clip away from the quick-connect fitting while lifting the screwdriver and position aside.

   Courtesy of CHRYSLER GROUP, LLC

3. Insert the commercially available fuel line removal tool (1) into the quick-connect fitting and release the internal latches.
   NOTE:

   After removal the internal latches will remain in the quick-connect fitting.

4. With the commercially available fuel line removal tool (1) still inserted, remove the quick-connect fitting from the fuel system component.