Removal And Installation: Installation
- Clean the mating surfaces of the throttle body and intake manifold.
- Install a NEW
O-ring seal onto the intake manifold.
- Install the throttle body and tighten the four bolts (1) in a criss-cross pattern sequence to the proper Specifications. Refer to FUEL INJECTION, GAS, TECHNICAL SPECIFICATIONS .
- Connect the throttle body wire harness connector (1) and secure the wire harness to the clip (2) on the throttle body.
- Install the resonator. Refer to RESONATOR, AIR CLEANER, REMOVAL AND INSTALLATION .
- Connect the negative battery cable.
