LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2021 >> Voyager LX, Gas >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery (Service Information) >> Battery >> Removal And Installation >> Supplemental >> Installation

Removal And Installation: Supplemental: Installation

WARNING:

Wear a suitable pair of rubber gloves when removing a battery by hand. Safety glasses should also be worn. If the battery is cracked or leaking, the electrolyte can burn the skin and eyes.

  1. Install the battery hold down bracket into position and tighten the battery hold down nut to the proper. Refer to TECHNICAL SPECIFICATIONS .
  2. Connect the positive battery cable to the supplemental battery and tighten to the proper torque specifications. Refer to TECHNICAL SPECIFICATIONS .
  3. Connect the negative battery cable to the supplemental battery and tighten to the proper torque specifications. Refer to TECHNICAL SPECIFICATIONS .
  4. Install the pre-fuse assembly and tighten the cable nuts to the proper. Refer to TECHNICAL SPECIFICATIONS .
  5. Connect the cable connectors to the pre-fuse assembly.
  6. Install the nuts securing the cables to the pre-fuse assembly and tighten to the proper torque specifications. Refer to TECHNICAL SPECIFICATIONS .
  7. Close the jump post stud cover.
  8. Connect the IBS to the negative battery post and tighten to the proper torque specifications. Refer to TECHNICAL SPECIFICATIONS .
  9. Install the air inlet duct. Refer to BODY, AIR CLEANER, REMOVAL AND INSTALLATION .
  10. Connect the negative battery cable to the charging battery.
scientia non olet · About LEMON Manuals