LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2021 >> Voyager LX, Gas >> Repair and Diagnosis >> Accessories & Equipment >> Infotainment >> Audio/Video/Entertainment/Connectivity (Service Information) >> Switch, Media Hub >> Removal And Installation >> Removal

Removal And Installation: Removal

  1. Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
    GC0177450Courtesy of CHRYSLER GROUP, LLC
  2. Remove the screw in the back of the media hub bezel bin.
  3. Using trim stick C-4755 or equivalent, remove the media hub bezel (1).
    GC0177863Courtesy of CHRYSLER GROUP, LLC
  4. Disconnect the media hub wire harness connector (1).
    GC0177221Courtesy of CHRYSLER GROUP, LLC
  5. Disconnect the media hub switch wire harness connector (1).
    GC0178189Courtesy of CHRYSLER GROUP, LLC
  6. Disconnect the vehicle wire harness connector (1).
    GC0177955Courtesy of CHRYSLER GROUP, LLC
  7. Remove the media hub switch (1) from the media hub bezel.
scientia non olet · About LEMON Manuals