Lamp, Courtesy - Door, Handle: Removal
NOTE:
Driver side illustrated; passenger side similar.
- Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
- Remove the appropriate left or right front door trim panel. Refer to PANEL, DOOR TRIM, REMOVAL AND INSTALLATION .
- Disconnect the door wiring harness lamp connector (1) from the door handle lamp (2).
- Press the locking tab (3) toward the lamp (2) to release the lamp from the door handle unit.
- Remove the lamp (2) from the vehicle.
