LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2021 >> Voyager LX, Gas >> Repair and Diagnosis >> Drivelines & Axles >> Axle Shafts >> Rear Half Shaft >> Diagnosis And Testing >> Diagnosis And Testing - HALFSHAFT >> Noise Or Vibration In Turns

Noise Or Vibration In Turns

Vibration associated with the Constant Velocity (CV) joints in the halfshafts occur in the 3rd and 6th order. Use a vibration analyzer to determine the frequency of the vibration.

SYMPTOM POSSIBLE CAUSE REPAIR
Clicking noise while turning.
  • Lack of lube in CV joint boots.
  • Replace the halfshaft.
Chuckling or snap noise while turning.
  • Loose wheel or hub nut.
  • Tighten wheel or hub nut. Replace damaged components.
Loud knocking noise centering on inner CV tripod joints.
  • Damaged differential side/pinion gears.
  • Remove halfshaft and rotate side gears by hand. Replaced damaged transmission components.

Noise may also be caused by another component of the vehicle coming in contact with the halfshaft, brake or wheel assemblies.

scientia non olet · About LEMON Manuals