Tie Rod &/Or End: Remove & Replace
WARNING: This page is about the Voyager L, Gas, which is a different variant/trim than selected.
Includes: Adjust toe-in only. NOTE: Deduct .4 if alignment is also performed.
NOTE: Manufacturer recommends removal of Rack and Pinion Steering Gear when replacing Inner Tie Rod End(s) on some models. If removal of the Rack and Pinion Gear is necessary, use Steering Gear - R&R plus combinations.| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|---|---|---|---|
| Inner,Both Sides | Includes: R&I Outer Tie Rod Ends. | 2.0 | B | |
| Inner,One Side | Includes: R&I Outer Tie Rod End. | 1.5 | B | |
| Outer,Both Sides | 1.4 | B | ||
| Outer,One Side | 1.1 | B | ||
| Combination Procedure: ADAPTIVE CRUISE CONTROL SYSTEM: Calibrate: | ||||
| Adaptive Cruise Control Module,Gen 4 | Includes: Perform ACC alignment procedure. | 1.3 | B | |
| Adaptive Cruise Control Module,Gen 5 | Includes: Additional time for use of scan tool to perform this procedure. | 0.3 | B | |
| Forward Facing Camera Module | Includes: Additional time for use of scan tool to perform this procedure. | 0.3 | B | |