Removal And Installation: Removal
- Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
- Lower the headliner to gain access to the Rear Cabin Comfort Controls (RCCC). Refer to HEADLINER, REMOVAL AND INSTALLATION
.
- Remove the four headliner (2) to RCCC (4) screws (1).
- Disconnect the wire harness connector (3) from the RCCC (4).
- Remove the RCCC and RCCC bezel (4) from the headliner.
- Remove the four RCCC (3) to RCCC bezel (2) screws (1).

