Theory Of Operation

The purpose of the diagnostic is to detect a functional failure of the pressure regulator output stages in the Transmission Control Module (TCM). The diagnostic monitors for an incorrect current feed to the pressure regulators which control the friction clutches. The monitoring is performed using two independent methods of comparing the commanded current to the measured current.

PWM Feedback Signal Check:  The Pulse Width Modulation (PWM) feedback signal generated by the current regulator in the output stage identifies a deviating output current for each current regulator. To perform a functional check of the output stage current, the TCM calculates the actual current based upon the PWM feedback signal, the output stage power supply voltage and the resistance of the corresponding pressure regulator. This calculated current is compared to the commanded current from the current regulator.