Vehicle Is Disabled
- Check for transmission Diagnostic Trouble Codes (DTC)s using the appropriate scan tool.
- Position the vehicle on a hoist with the transmission in neutral. Refer to HOISTING, STANDARD PROCEDURE .
- Check for cracked, leaking cooler lines.
- Check the fluid level and condition. Refer to FLUID AND FILTER, STANDARD PROCEDURE .
- With the transmission in the PARK position, attempt to rotate half shafts to make sure the transmission output shaft is intact.
- Check the Transmission Control Module (TCM), wiring, valve body, and solenoids (Utilize DTCs to diagnose if available).